304 & 316L Stainless NEMA 4X · CAD Laser Pre-Cutouts · 15-Minute Formal Quote
NEMA 250 TYPE 4X · UL 508A PANEL-READY FABRICATION

304 & 316L Stainless Steel NEMA 4X Enclosures With CAD Laser Pre-Cutouts

Sanitary sloped-roof washdown wall-mounts, marine 316L chloride-resistant cabinets, and heavy-gauge double-door PLC enclosures fabricated with continuous poured-in-place polyurethane gaskets and factory fiber-laser cutouts. Request a 15-minute formal quote.

304 & 316L SSMolybdenum Chloride Resistance
15–20° Sloped TopSanitary Washdown Runoff
Laser Pre-Cut CADZero Field Stainless Drilling
N4X-WM304 brushed 304 stainless steel sloped-roof NEMA 4X wall-mount washdown enclosure engineering drawing
N4X-WM304 Sloped-Roof Sanitary Wall-Mount · #4 Brushed FinishN4X-WM304

NEMA 4X Alloy & Mounting Specification Matrix

Showing 5 of 5 configurations
PRECISION CUSTOM FABRICATION

CAD Laser Pre-Cutout Service — Ship Panel-Ready With Zero Field Drilling

Cutting stainless steel in the field work-hardens 304/316L sheet, burns hole saws, scatters conductive swarf into PLC wiring, and compromises washdown sealing edges. Send your DXF or STEP file to receive burr-free fiber-laser cutouts before gasket pouring.

  • ±0.15 mm fiber-laser tolerance for HMI bezels, 22.5 mm / 30.5 mm pushbutton grids, DIN meters, and viewing windows
  • Custom bottom or side removable stainless gland plates with M20/M25/M32/NPT conduit knockouts and EPDM perimeter seals
  • Continuous foam-in-place polyurethane gasket robot-dispensed after cutting and passivation for intact Type 4X compression
  • 15-minute formal quote turnaround on standard and modified CAD drawings with project mill certificates available
Send CAD / Cutout Drawing (15-Min Quote)WhatsApp Engineering Desk
STANDARD & CONFIGURABLE LINEUP

NEMA 4X Stainless Enclosure Configurations

Compare all 5 standard and panel-ready stainless steel series with dual-unit specifications (metric & imperial) and 15-minute formal quotation.

View Full Catalog (5)
N4X-WM304 brushed 304 stainless steel 20-degree sloped-roof NEMA 4X wall-mount washdown enclosure
N4X-WM304Sanitary Washdown

304 Sanitary Wall-Mount Sloped Roof

20° sloped-roof AISI 304 wall-mount enclosure (16/14 ga) with continuous poured-in-place PU gasket, concealed hinge, and brushed #4 sanitary finish.

  • Alloy & FinishAISI 304 · #4 Brushed
  • Roof Slope20° Sloped + Drip Lip
  • Wall Gauge16 ga (1.5 mm) / 14 ga (2.0 mm)
  • Gasket Temp-40°C to +100°C Poured PU
N4X-FS304 free-standing 304 stainless steel washdown NEMA 4X PLC control cabinet with sloped top and sanitary feet
N4X-FS304Floor-Mount PLC

304 Free-Standing Washdown Control Cabinet

Floor-standing single-door AISI 304 cabinet (14/12 ga) with 15° sloped roof, 3-point padlockable stainless handle, sanitary leveling feet, and heavy 10 ga sub-panel.

  • Alloy & GaugeAISI 304 · 14/12 ga (2.0–2.5 mm)
  • Standard Height1600–2000 mm (63–78.7 in)
  • Latching3-Point Padlockable 316 SS
  • Sub-Panel10 ga (3.0 mm) Galvanized
N4X-WM316L AISI 316L marine and chemical wall-mount NEMA 4X stainless steel enclosure
N4X-WM316LMarine / Chloride

316L Marine/Chemical Wall-Mount

AISI 316L molybdenum-alloyed wall-mount enclosure (16/14 ga) with continuous 316 SS piano hinge, screw-down/quarter-turn 316 latches, and seamless poured PU gasket.

  • Alloy GradeAISI 316L (2–3% Mo, <=0.03% C)
  • Wall Gauge16 ga (1.5 mm) / 14 ga (2.0 mm)
  • External Hardware100% 316 Stainless Steel
  • Gasket SystemSeamless Poured PU / Viton Opt.
N4X-DD316L 316L stainless steel double-door floor-standing NEMA 4X bay control enclosure
N4X-DD316LDouble-Door Heavy

316L Double-Door Bay Enclosure

Heavy 12 ga (2.5 mm) AISI 316L double-door floor-mount enclosure with removable center mullion, overlapping 3-point 316 SS latches, and full-width 10 ga back panel.

  • Alloy & GaugeAISI 316L · 12 ga (2.5 mm)
  • Standard Widths1200–1600 mm (47.2–63.0 in)
  • Center PostRemovable Sealed Mullion
  • Sub-Panel10 ga (3.0 mm) Full-Width
N4X-CNC-CUT factory fiber-laser pre-cut stainless steel NEMA 4X door with HMI, 22.5mm pushbutton, and gland plate cutouts
N4X-CNC-CUTCAD Pre-Cut Service

Laser Pre-Cut HMI/Pushbutton Panel-Ready Enclosure

Custom-modified 304 or 316L wall-mount or floor-stand NEMA 4X enclosures with ±0.15 mm CAD fiber-laser HMI, pushbutton, louver/cooler, and gland plate cutouts.

  • Laser Tolerance±0.15 mm (±0.006 in)
  • CAD InputsDXF / DWG / STEP
  • Alloy OptionsAISI 304 or AISI 316L
  • Turnaround15-Min Formal Quote
ENGINEERING BENCHMARK

Objective Specification Benchmark: N4X Series vs. nVent HOFFMAN & Hammond

Dimensional, metallurgical, sealing, and pre-cutout engineering comparison across standard industrial stainless steel Type 4X families.

Request 15-Min Formal Quote
Engineering ParameterN4X-WM304 / N4X-WM316L / N4X-CNC-CUTnVent HOFFMAN Concept / ProLine SSHammond 1418 / Eclipse SS Series
Stainless Steel AlloysAISI 304 (18Cr-8Ni) & AISI 316L (2–3% Mo, <=0.03% C) with #4 brushed finishType 304 and Type 316L brushed stainless across Concept and floor-stand linesType 304 and Type 316L #4 brushed stainless across 1418 and Eclipse series
Wall & Door Gauge16 ga (1.5 mm) / 14 ga (2.0 mm) wall-mount; 12 ga (2.5 mm) floor-stand & bay16 ga or 14 ga body/door on wall-mount; 12 ga on heavy floor-standing cabinets14 ga body/door standard on 1418/Eclipse wall-mount; 12 ga on free-standing
Roof & Washdown Runoff15–20° sloped sanitary top with front overhang drip lip standard on N4X-WM304/FS304Flat top standard; sloped-top hygienic option available on specialized Watershed lineFlat top standard on 1418/Eclipse; sloped top offered as separate hygienic SKU family
Perimeter Door GasketContinuous robot-poured polyurethane (PU) foam-in-place (-40°C to +100°C); FDA silicone optionSeamless foam-in-place gasket with oil- and water-resistant compression lipSeamless poured-in-place gasket on Eclipse; oil-resistant strip/poured on 1418
Factory CAD Laser Pre-CutoutsNative N4X-CNC-CUT workflow: DXF/STEP HMI, pushbutton, louver, and gland plate cuts pre-shipAvailable via distributor/factory modification center with separate modification schedulingAvailable via custom factory modification quoting and minimum batch review
Internal Sub-Panel12 ga / 10 ga (2.5–3.0 mm) galvanized steel or 304 SS mounting panel on weld studsPainted white or conductive steel sub-panel ordered separately by catalog suffix12 ga / 10 ga white-painted inner panel ordered separately on most SKUs
Standards & Compliance DocsBuilt to NEMA 250 Type 4X and UL 508A enclosure design requirements; mill certs & ingress reports per projectUL 508A / cUL Type 4, 4X and IEC 60529 IP66 ratings published by SKUUL 508A Type 4, 4X and CSA Type 4, 4X ratings published by SKU
Quotation Turnaround15-Minute Formal Quote directly from engineering desk (standard or DXF pre-cut)Distributor RFQ routing; multi-day turnaround for modified cutoutsDistributor RFQ routing; custom CAD modification review cycle
APPLICATION & BENCHMARK GUIDES

Engineering Selection & Architecture Hubs

Structured specification pages covering operating conditions, industry compliance, and direct series comparisons.

TOOLS & TECHNICAL REFERENCE

Calculators & Engineering Checklists

Verify thermal dissipation, clearances, load limits, and standards compliance before freezing your approval drawing.

15-MINUTE FORMAL QUOTE

Ready to Verify Dimensions, Cutouts, or Project Quantities?

Send your target model code, operating requirements, quantity tier, and delivery postal code directly to our engineering desk for a formal quotation within 15 minutes.

Open Specification BriefWhatsApp +86 13392250172Email jacklau@nema4xsupply.com